Installation And Commissioning; Disassembly And Re-Assembly - Helios AIR1-ULM Série Notice De Montage Et D'utilisation

Installation and Operating Instructions
CHAPTER 2
INSTALLATION AND
COMMISSIONING
m
WARNING
m
DANGER
m
DANGER
m m
DANGER DANGER
Recirculation module AIR1-ULM
The dimensions and weight of the recirculation module are shown in the following illustration, see Fig. 1.
480
Art.-Nr. Type
06040 AIR1-ULM RH 5000
06160 AIR1-ULM RH 6000
06184 AIR1-ULM RH 8000
06185 AIR1-ULM RH 9500
06170 AIR1-ULM RH 12000
06182 AIR1-ULM RH 15000
2.0 General installation instructions
2.0.1 Receipt
Please check delivery immediately on receipt for accuracy and damage. If damaged, please notify the carrier immedia-
tely. In case of delayed notification, any possible claim may be void.
2.0.2 Storage
When storing for a prolonged time, the following steps are to be taken to avoid damaging influences:
Protection by dry, airtight and dust-proof packaging (plastic bag with desiccant and humidity indicators). The storage
place must be waterproof, vibration-free and free of temperature variations. Damages due to improper transportation,
storage or commissioning must be verified and are not liable for warranty.

2.0.3 Disassembly and re-assembly

m
Risk of personal injury and material damage!
The disassembly and re-assembly of the unit are not part of routine maintenance.
– The disassembly and re-assembly of the unit may only be carried out by qualified specialist personnel.
2.0.4 Disposal
m
Danger to life due to electric shock
An electric shock can result in death or serious injury.
– Ensure that the unit is voltage-free and isolated from the mains power supply. Ground and short circuit the unit, shield
neighbouring live components.
Dispose of all components and disused operating materials in an environmentally-friendly manner in accordance with
the local codes, practices and environmental regulations.
An authorised specialist waste processing company must dispose of the unit or the individual components. The appo-
inted contractor must ensure that:
The components are separated according to material types.
2.1 Assembly
m
Danger to life due to electric shock!
The installation and connection of the unit may only be carried out by qualified specialist personnel. The electrical con-
nections must be carried out by a person who has proper professional training and experience in the relevant accident
prevention regulations, as well as other generally recognised safety and occupational health codes, with authorisation
to perform work on the ventilation unit.
Risk of injury due to electric shock, moving parts!
The unit must be fully isolated from the mains power supply before all maintenance and installation work and
opening the AIR1 ventilation unit! The electrical connections must be carried out in accordance with the fol-
lowing wiring diagrams and must only be carried out by qualified electricians. The electrical connection must
be fully isolated until the final assembly!
C
Type
AIR1-ULM RH 5000
AIR1-ULM RH 6000
Maße (mm)
B C E
AIR1-ULM RH 8000
1470 1240 1650
AIR1-ULM RH 9500
1590 1360 1770
AIR1-ULM RH 12000 2090
1840 1610 2020
AIR1-ULM RH 15000 2340
1940 1710 2120
2090 1860 2270
2340 2110 2520
!
2
EN
Fig.1
B C E kg
1470 1240 1650 85
1590 1360 1770 100
1840 1610 2020 130
1940 1710 2120 150
1860 2270 190
2110 2520 230