General Information; Important Information; Warning And Safety Instructions; Warranty Claims - Exclusion Of Liability - Helios KWL-BE Eco Mode D'emploi

Installation and Operating instructions
CHAPTER 1
1�1 Important information
GENERAL
INFORMATION
1�2 Warning and safety instructions
m
m DANGER
m WARNING
m CAUTION
ATTENTION
1�3 Warranty claims – exclusion of liability
1�4 Certificates - guidelines
1�5 Receipt
1�6 Storage
1�7 Standstill and disposal
Slide switch controller - KWL-BE Eco
In order to ensure complete and effective operation and for your own safety, all of the
following instructions should be read carefully and observed. The relevant national stan-
dards, safety regulations and instructions (e.g. DIN EN VDE 0100) as well as the technical
connection conditions of the energy supply company must be observed and applied.
Keep the operating instructions close to the unit for easy reference. After the final assem-
bly, the document must be issued to the operator (tenant/owner).
The adjacent symbol is a safety-relevant warning symbol� All safety regulations
and/or symbols must be absolutely adhered to, so that any dangerous situation
is avoided�
m
DANGER
Indicates dangers which will directly result in death or serious injury if the safety instruction is
not followed.
m
WARNING
Indicates dangers which will result in death or serious injury if the safety instruction is not
followed.
m
CAUTION
Indicates dangers which can result in injuries if the safety instruction is not followed.
ATTENTION
Indicates dangers which can result in material damage if the safety instruction is not followed.
Our warranty shall not apply if the following instructions are not observed. The same
applies for liability claims against the manufacturer. The use of accessories, which are not
recommended or offered by Helios, is not permitted. Any damage that may occur is not
liable for warranty.
If the product is installed correctly and used to its intended purpose, it conforms to all
applicable standards and CE guidelines at its date of manufacture.
The delivery contains the slide switch controller KWL-BE Eco. Please check delivery
immediately on receipt for accuracy and damage. If damaged, please notify the carrier
immediately. In case of delayed notification, any possible claim may be void.
When storing for a prolonged time, the following steps are to be taken to avoid damaging
influences: Protection by dry, air-dustproof packing (plastic bags with drying agent and
moisture indicators). The storage place must be waterproof, vibration-free and free of
temperature
variations. Damages due to improper transportation, storage or putting into operation are
not liable for warranty.
Parts and components of the fan, whose service life has expired, e.g. due to wear and
tear, corrosion, mechanical load, fatigue and/or other effects that cannot be directly
discerned, must be disposed of expertly and properly after disassembly in accordance
with the national and international laws and regulations. The same also applies to auxiliary
materials in use. Such as oils and greases or other substances.
The intended and unintended further use of worn parts, e.g. impellers, rolling bearings,
filters, etc. can result in danger to persons, the environment as well as machines and
systems. The corresponding operator guidelines applicable onsite must be observed
and used.
1
EN