Other Information - Philips Ultinon LED-HL H7 Mode D'emploi

• The LED illumination of the LED-HL [≈H7] lamp is of high
intensity; do not look directly at the LED-HL [≈H7] lamp, to avoid
eye damage.
• Before you remove the halogen H7 lamp, make sure that the
lamp's temperature has dropped to room temperature, to avoid
burning fingers or skin.
• Do not let the LED-HL [≈H7] lamp become exposed to dust,
grease or stains, or scratch the surface of the LED; this will dam-
age the LED-HL [≈H7] lamp.
• Do not let children touch the LED-HL [≈H7] product.
m Other Information
• Please make sure that you purchase the Philips LED-HL [≈H7]
lamp through the correct channels.
• After the lamp is installed, please check if the light pattern is okay,
and make sure that the indicators on the dash board are working
normally and that nothing is abnormal.
• After the lamp is installed, please check whether the air-tight cover
is properly sealed to avoid undesirable sealing; and whether the
control box and the wiring harness are firmly in place, and not
interfering with other par ts inside the lamp or the fan above
the lamp.
5