Philips Ultinon LED-HL H7 Mode D'emploi page 11

Troubleshooting
6
If the LED-HL [≈H7] lamp does not turn on, please check if any of
the following conditions exists:
1. Are the positive and negative power connectors properly connected?
2. Check if the power switch for the lamp is turned on.
3. Make sure that there is sufficient power in the battery.
Recycling
7
This product is designed in compliance with the applicable
requirements of European Directive 2002/96/EC. Its parts
and elements may be recycled for reuse.
Do not discard this product carelessly. Certain substances
in the electronic elements can be harmful for the environ-
ment and humans.
11