Storage And Maintenance; Disposal; Technical Data - Beurer medical FT 70 Mode D'emploi

Masquer les pouces Voir aussi pour FT 70:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

9. Storage and maintenance

• Clean the sensor tip after each use. Use a clean cloth or cotton bud that can be moistened with disinfectant, alcohol or
warm water.
• To clean the entire device, please use a soft cloth slightly moistened with a mild soapy solution.
• Do not use any harsh cleaning products.
• Always store the thermometer with the forehead/cover cap on.
• If prolonged storage is intended, you should remove the battery.
• The device must not be stored or used at an excessively high or low temperature or humidity (see technical data), in
sunlight, in association with an electrical current or in dusty locations. Otherwise inaccuracies can occur.

10. Disposal

• The empty, completely flat batteries must be disposed of through specially designated collection boxes, recycling
points or electronics retailers. You are legally required to dispose of the batteries.
• The codes below are printed on batteries containing harmful substances:
Pb = Battery contains lead,
Cd = Battery contains cadmium,
Hg = Battery contains mercury.
• For environmental reasons, do not dispose of the device in the household waste at the end of its useful life.
Dispose of the unit at a suitable local collection or recycling point. Dispose of the device in accordance with EC
Directive – WEEE (Waste Electrical and Electronic Equipment). If you have any questions, please contact the
local authorities responsible for waste disposal.

11. Technical data

Note: If the device is used other than in accordance with the specifications, perfect functioning cannot be guaranteed!
We reserve the right to make technical changes to improve and develop the product.
The accuracy of this thermometer has been carefully checked and developed with regard to a long useful life.
If using the device for commercial medical purposes, it must be regularly tested for accuracy by appropriate means.
Precise instructions for checking accuracy may be requested from the service address.
28

Publicité

Table des Matières
loading

Table des Matières