Hansgrohe RainBrain 15841 Série Mode D'emploi page 14

Standard temperature
In the standard temperature menu you can set the initial (beginning),
maximum and scalding protection temperatures.
The initial temperature can be set within a range of 11 levels (30 °C - 40
°C) or 19 levels (86 °F - 104 °F). The factory setting is 38 °C / 100 °F
The maximum temperature can be set within a range of 31 levels (30 °C
- 48 °C) or 35 levels (86 °F - 120 °F). The factory setting is 48 °C / 120
°F
The scalding protection temperature can be set within a range of 5 levels
(38 °C - 42 °C) or (100 °F - 108 °F). The factory setting is 42 °C / 108
°F
Confirm the changes with OK.
Standard temperature
Initial temperature
Maximum temperature
Scalding protection temp.
Back
Temperature °C/°F
In the temperature °C / °F menu you can swicth between °C and °F.
Confirm the changes with OK.
Temperature °C/°F
°F
°C
Back
1
Operating instructions
100°F
120°F
108°F
OK
OK
English:
Switch-off time
In the switch-off time menu you can set the switch-off times for water and
music*.
The switch-off time for water can be set within a range of 11 levels (1 - 30
min. and indefinite). The factory setting is 30 min.
The switch-off time for music can be set within a range of 5 levels (15 - 60
min. and indefinite). The factory setting is 60 min.
Confirm the changes with OK.
*The light option shown is not available in the US.
Switch-off times
Switch off after:
water
Light and music
Back
The switch-off timer starts when the when the water and/or the music is
turned on. The timer starts over each time the RainBrain is used.
If music is turned on while the showers are off, the music stays on for the
time set.
The standby timer (15 min.) activates after the showers and the music are
turned off.
30 min
30 min
OK