Product Overview - Hach SIP 10 Instructions D'utilisation

radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in which case the user will be required to
correct the interference at their expense. The following techniques can be used to reduce
interference problems:
1. Disconnect the equipment from its power source to verify that it is or is not the source of the
interference.
2. If the equipment is connected to the same outlet as the device experiencing interference, connect
the equipment to a different outlet.
3. Move the equipment away from the device receiving the interference.
4. Reposition the receiving antenna for the device receiving the interference.
5. Try combinations of the above.

Product overview

Fire hazard. This product is not designed for use with flammable liquids.
Chemical exposure hazard. Dispose of chemicals and wastes in accordance with local, regional and
national regulations.
The SIP 10 sipper kit for the TL23xx turbidimeter is used to pull a selected quantity of a water sample
through the flow cell in the TL23xx before each turbidity measurement. Refer to
the sipper pulls a selected quantity of a user-supplied rinse agent through the flow cell after each
turbidity measurement.
W A R N I N G
C A U T I O N
Figure 1. If selected,
English 5