Connect The Usb Cable; Operation - Hach SIP 10 Instructions D'utilisation
Masquer les pouces
Voir aussi pour SIP 10:
- Manuel d'utilisation de base (50 pages) ,
- Instructions d'utilisation (112 pages)
Table des Matières
Publicité
Install the tubing
Install the tubing as shown in the illustrated steps that follow.
Connect the USB cable
Connect the USB cable as shown in the illustrated steps that follow.
Operation
Configure the settings
1. Connect the turbidimeter power cable to an electrical outlet.
2. Push the power button to set the turbidimeter to on.
3. Push Sipper.
8 English
Publicité
Chapitres
Table des Matières
Dépannage
