Electrolux EIED200QS Instructions D'installation page 13

10 Rotate inner lens 180° and place back into door
assembly.
180
11 Reinstall inner door ring with 12 screws removed earlier.
6
5
4
3
2
12 Gently pry the plastic latch cover from the front panel
and set it aside. Remove the 3 screws securing the door
latch and release the latch.
1
13 Rotate the latch 180° and reinstall it in the opposite
location.
1
180
7
8
9
11
12
11
1
2
3
2
Reversing Door
14 Rotate the plastic latch cover 180° and snap it in place
around the door latch.
180
15 While supporting the door, install the 2 hinge mounting
screws removed in first step. Attach the upper screw first
and then the lower one.
10
16 Close the door and test operation of hinge, strike and
latch.
3
1 2
13