Electrolux EIED200QS Instructions D'installation page 10

10 Installation Instructions
Direct Drain Kit, continued
6 To route the drain tube to the left of the dryer, secure
the tube with the "P" clamp from the kit to the back of
the dryer with the cabinet screw shown below.
7 To route the drain tube to the right of the dryer, route the
tube across the back of the dryer and snap it into the
"C" clips shown as below.
8 Install the hose hanger from the kit onto the end of the
hose and insert in drain.
IMPORTANT
Follow these guidelines for proper drain hose installation:
1 The distance from the bottom of the drain tube sag to
the top of highest part of drain tube should be no more
than 20" (50 cm).
Drain tube may need to be shortened with scissors if
sag is greater than allowed.
2 The drain height location should be no more than 40"
(100 cm) above the bottom of the dryer feet.
MAX
20"
(50 cm)
MAX
40"
(100 cm)