sylvac UL 4 Mode D'emploi page 6

1. Operating features of the instrument
- The instrument has two operating modes: first level functions (direct
MODE
access) and second level functions. (see chaps. 3 and 4)
- The «favourite» key gives direct access to one of the most used func-
tions (see chap. 5)
- Sets a Preset value, reset the MIN/MAX mode, applies a selection and
SET
controls switching off the instrument. By default, SIS mode enables au-
tomatic switch-off without any loss of origin (see chap. 7).
1.1 Personalising the functions
It is possible to activate or de-activate some functions of the instrument (see
chap. 9)
1.2 Data transmission parameters
4800Bds, 7 bits, even parity, 2 stop bits
2. Start
Press any button.
6