Positioning The Unit; Before Using For The First Time - SEVERIN 910.045 Mode D'emploi

Dear Customer
Before using the appliance, please read the following instructions carefully and keep this
instruction manual for future reference. The appliance must only be used by persons familiar
with these instructions.
1. Door locks
2. Viewing window
3. Interior light
4. Protective cover
5. Drive unit
6. Roller ring
●
Always place the microwave oven on a stable, level and heat-resistant surface, ensuring
that it is protected from any heat source or excessive humidity.
●
Do not operate the appliance outdoors.
●
Sufficient ventilation must be ensured at all
times. Do not place any objects on the unit,
and make sure that the following minimum
distances from any wall or other object are
maintained:
One side: 7.5 cm; other side unobstructed
Rear: 7.5 cm
Top: 30.0 cm
The feet on the base of the unit must not be
removed.
The unit must not be installed inside a cupboard; when positioning the unit, also ensure
that it is not placed directly underneath a cupboard or any other similar object.
Connection to the mains supply
The appliance should only be connected to an earthed socket installed in accordance with
the regulations. Make sure that the supply voltage corresponds with the voltage marked on
the rating label. This product complies with all binding CE labelling directives.
●
Remove any exterior and interior packaging materials. All these materials are suitable
for recycling.
●
After unpacking and every time before connecting the unit to the power supply, check
the unit and its power cord carefully for any signs of damage. Also ensure that the door,
including the viewing window and door locks, are not damaged or bent and that it closes
firmly against the support. This is important to ensure that no microwave energy is
allowed to escape during operation. For the same reason, the entire casing as well as the
910045 de-en-fr-nl ma 2012
Familiarisation

Positioning the unit

Before using for the first time

17/56