Bosch Active Line Notice Originale page 7

6
5
4
Options for switching off the eBike system:
– Press the On/Off button 5 of the on-board computer.
– Switch off the eBike battery using its On/Off button
(bicycle manufacturer-specific solutions are possible
whereby there is no access to the battery On/Off button;
see the bicycle manufacturer operating instructions).
– Remove the on-board computer out of its holder.
If the eBike is not moved and no button is pressed on the
on-board computer for 10 minutes, the eBike system will
shut down automatically in order to save energy.
eShift (optional)
eShift is the integration of electronic gear shifting systems
into the eBike system. The eShift components are electri-
cally connected to the drive unit by the manufacturer. The
separate operating instructions describe how to operate
the electronic gear-shifting systems.
Bosch eBike Systems
1
2
3
Indications and Settings of the on-board
computer
Energy supply of the on-board computer
If the on-board computer is in the holder 4, a sufficiently
charged battery pack is inserted into the eBike and the
eBike system is turned on, then the on-board computer is
powered by the eBike battery pack.
If the on-board computer is removed from the holder 4, the
energy is supplied via an internal battery pack. If the inter-
nal battery pack is weak when the on-board computer is
switched on, "Attach to bike" will appear in text indication
d for 3 s. The on-board computer will then turn off again.
To charge the internal battery pack, put the on-board com-
puter back in the holder 4 (when a battery pack is inserted
in the eBike). Switch the eBike battery pack on by its
On/Off button (see battery pack operating instructions).
You can also charge the on-board computer via the USB
port. Open the protective cap 8. Connect the USB port 7 of
the on-board computer via a suitable USB cable to a stan-
dard USB charger or the USB port of a computer (5 V charg-
ing voltage, max. 500 mA charging current). "USB con-
nected" will appear in the text indication d of the on-board
computer.
h
g
f
e
Switching the on-board computer On/Off
To switch on the on-board computer, briefly press the
On/Off button 5. When the internal battery pack is suffi-
ciently charged, the on-board computer can also be
switched on when not inserted in the holder.
To switch off the on-board computer, press the On/Off
button 5.
When the on-board computer is not inserted in the holder
and no button is pressed, it automatically switches off after
1 min to save energy.
 If you are not going to be using your eBike for several
weeks, remove the on-board computer from its
mount. Store the on-board computer in a dry environ-
ment at room temperature. Regularly recharge the on-
board computer's battery (at least every 3 months).
English–6
i
TURBO
a
SPORT
TOUR
b
ECO
OFF
c
MPH
KM/H
AMM
PMWH
MIN
MPH
KM/H
Range
d
1 270 U20 XBI | (25.4.17)