Hama 00118094 Mode D'emploi page 4

G Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely. Please
keep these instructions in a safe place for future reference. If you sell the device, please
pass these operating instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
arning
W
This symbol is used to indicate safety instructions or to draw your attention to speci c
hazards and risks.
ote
N
This symbol is used to indicate additional information or important notes.
2. Package Contents
• TV bracket
• Mounting column
• Bottom panel
• Installation kit (see contents, Fig. 1)
• These operating instructions
ote
N
Please check that the installation kit is complete before installing the TV Stand and
ensure that none of the parts are faulty or damaged.
3. Safety Notes
W arning
• Please contact a quali ed specialist before mounting the TV stand.
• Maintain the necessary safety clearance around the attached load (depending on
the model).
• After the TV stand has been mounted, check that it is su ciently secure and safe
to use.
• You should repeat this check at regular intervals (at least every three months).
• In case of damage, remove the devices and do not continue to use the TV stand.
• Ensure that the electrical cables are not crushed or damaged during installation.
• Do not place loads on the TV stand that are heavier than the speci ed load
bearing capacity, and do not exceed the speci ed maximum screen size.
• Ensure that the load on the TV stand is symmetrically balanced.
• Place the product only on at, non-slip surfaces that can bear the weight of the
product and the device attached to it.
• Check the general operational safety regularly, and make sure that the product and
the device attached to it are positioned securely.
• You should repeat this check at regular intervals (at least every three months).
• In the event of damage to the product, remove the attached load and stop using
the product.
• Keep the packaging material out of the reach of children due to the risk of
suffocation.
• Dispose of packaging material immediately according to locally applicable
regulations.
• Do not modify the product in any way. Doing so voids the warranty.
• Do not attach any other objects to the product.
ote
N
Note that the feet of the product can cause pressure marks on the surface on which
the product is positioned. This will depend on the weight load and the stability of the
surface where the product is located.
4. Intended use and specifications
• The product is used for mounting at panel displays for non-commercial, private
household use.
• The product is intended for indoor use only.
• Use the TV stand for the intended purpose only.
Screen size: 81.0 - 140.0 cm (US: 32" - 55")
Mounting holes: according to the VESA standard until: 400x400
Loading capacity of the wall
30 kg
bracket:
Pivoting range: up to 60° (depends on the device)
Dimensions of the bottom
40 x 26 cm
panel:
Height at the middle of the
46.4 cm
TV plate :
5. Installation requirements and installation
ote
N
• Only mount the TV stand with the help of a second person! Get the support and
help you need.
• Ensure that no electrical cables are crushed or damaged during installation or
adjusting.
• Once you have mounted the product and the attached load, check that they are
su ciently secure and safe to use.
• Observe the other warnings and safety instructions.
• Proceed step-for-step in accordance with the illustrated installation instructions
(Fig. 1 ff.).
• Position the pre-assembled TV stand ( g. 1 to 3) at the desired point.
• First, x the TV support arms to the VESA boreholes on the TV ( g. 4) and then hang
the TV at the desired height ( g. 5a).
• Mount and fasten the securing element (F2) to secure the bracket ( g. 5a/detailed
view)
N ote
• Given the multitude of terminal devices available on the market, we cannot
describe all possible mounting options here.
• Please ensure that the bracket lays at and evenly on the back of the television.
• Use the enclosed spacer to even out any unevenness on the back of the television.
• Ensure that all screws have the proper length and can be mounted until they are
hand-tight (see Fig. 4).
6. Setting and maintenance
arning
W
• Only adjust the bracket with the help of a second person. Get the support and
help you need.
• When doing so, ensure that the product does not exceed its maximum permitted
carrying capacity and that no load exceeding the maximum permitted dimensions
is attached.
• Remove the TV from the bracket if you want to change the position of the TV
stand.
• Check that the bracket is secure and safe to use at regular intervals (at least every
three months). Only use water or standard household cleaners for cleaning.
• If the rotate function is stiff, loosen the nut (A7) on the hinge slightly ( g. 3, detailed
view a).
7. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage
resulting from improper installation/mounting, improper use of the product or from
failure to observe the operating instructions and/or safety notes.
2