Selve iveo Multi Send Notice D'utilisation page 52

Troubleshooting
Problem
Motor is not functioning, trans-
mission control light is not lit
Motor is not functioning, trans-
mission control light is lit
Transmission control light and the
word BATTERY is displayed
Astro programme does not function
according to the switching times
The iveo Multi Send does not carry
out the switching commands
The iveo Multi Send does not
carry out the switching commands
precisely
Venetian blind does not move to the
end limit
The transmitter does not react after
the batteries have been changed
Cause
Batteries are dead
Batteries are incorrectly inserted
Receiver outside the radio range
Transmitter is not programmed in
the receiver
Batteries are running out
Date is incorrect
Wrong city or wrong latitude/
longitude set
Holiday function is switched on
Astro shift is set
The sliding switch is on manual
Holiday function is switched on
No end limit position is set
Power supply has been interrupted
for too long
Solution
Insert new batteries
Insert batteries correctly
Reduce distance to the receiver
Programme transmitter
Insert new batteries
Set correct date
Set correct city or exact degrees
latitude/longitude
Switch holiday function off
Adjust astro shift
Move the sliding switch to auto-
matic
Switch holiday function off
Set the end limit position using the
setting menu PROG END LIMIT
Push RESET, check settings