Enabling / Disabling The Beeper - OHAUS Guardian 7000 Série Mode D'emploi

Guardian 7000 Series

2.15 Enabling / Disabling the Beeper

Disabling the Beeper Setting will prevent beeps in the following scenarios:
•
Starting and Stopping the Heater
•
Starting and Stopping the Stirrer
•
When the heater reaches the set temperature
•
When the timer reaches 00:00 in countdown mode
•
Loading a program
•
Running a program
•
Starting Single Point Calibration (SPC)
•
Turning SmartLink™ (BLE) On and Off
1. To control the Beeper Setting, the unit must first be
in the top level of the settings menu.
2. Rotate the left knob (C) to scroll to the 'SYS'
(System) setting.
3. Briefly press the left knob (C) to enter the System
settings menu.
4. Briefly press the left knob (C) to change the
beeper setting.
5. Rotate the left knob (C) to scroll to the desired
beeper setting.
EN for enable and DIS for disable.
6. Briefly press the left knob (C) to confirm the
desired beeper setting.
7. Rotate the left knob (C) to the "BACK" icon.
EN-37