System settings
Menu description SYSTEM CONFIG
Note: the underlined value/command is the default value/command. The units of measure depend on
parameter SYSTEM CONFIG > Units
Display >
Illumination
Display >
Bargraph settings
Display > Illumination
mode
Units
Damping >
Wind damping/
Heading damping
Clock >
Clock format
Clock >
Clock offset
EasyLink > EasyLink
connector 1/EasyLink
connector 2
Reset >
Reset factory
Reset >
Reset MediaBox
Demo mode
58
7" TFT display | Operating instruction v. 1.0 | © 2018 Continental Automotive Switzerland AG
Setting
Description
Display and connected 52 mm
gauges brightness
Bar graph interval (values Hi and Lo)
Color and brightness profile
Units of measure for the values
displayed
Data damping, see "Damping
(Damping)" on the facing page
Time format
Time zone
Engines and tanks whose data is
displayed on EasyLink gauges
Restore all settings including
MediaBox to factory settings
Available only with MediaBox
connected. Only restore MediaBox
settings to factory settings
Device operating simulation.
: simulation mode
Note
remains on even after the
device is turned off.
Possible values/commands
1-7
Boost press: 0–13 bar
l
(default = 0-1)
Engine temp 0–300 °C
l
(default = 0–200)
Battery voltage 8–32 V
l
(default = 10-16)
Fuel flow 0–800 l/h
l
(default = 0-150)
Blue day: blue gauge background, white characters, 7
l
brightness
Blue night: blue gauge background, red characters, 2
l
brightness
Amber day: amber gauge background, white characters, 7
l
brightness
Amber night: amber gauge background, red characters, 2
l
brightness
Metric
l
Imperial
l
Nautical
l
Custom: fully customizable
l
See "Unit of measure" on the facing page.
No
l
Low
l
Medium
l
High
l
12 h
l
24 h
l
From -12 to +12 h (0h)
Show engine data from: Engine 1–4
l
Show fuel from: Tank 1–4
l
Show fresh water from: Tank 1–4
l
Show waste water from: Tank 1–4
l
Yes
l
No
l
Yes
l
No
l
On: the device displays random values. Data is also
l
transmitted to connected 52 mm gauges.
Off: turn off simulation mode
l