Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Operating Instructions
DOOR REVERSAL INSTRUCTIONS
To avoid personal injury to yourself or property, we recommend that someone assist you during the
door reversal process.
This keg cooler has a door that can be set to open from the left or right side. This unit is delivered
to you with the door opening from the left side. To reverse the opening direction, please follow the
instructions below.
1. Undo the three (3) screws in each bracket using a Phillips screwdriver.
2. Remove the screws and bracket. Place to one side.
3. Slide the door down about 15 cm (6") and off the top hinge pin and lift away.
4. Use a fl at head screwdriver to remove te pin from the top bracket. Replace it in the hinge bracket
on the opposite side.
5. Remove the screw from the side of the fridge where the bracket is to be re-fi tted.
6. Slide the fridge door back onto the top hinge, making sure it's the right way up. Screw the bottom
hinge into place on the new side.
7. Check that the door is aligned horizontally and vertically and that the seals are closed on all sides
before fi nally tightening the bottom hinge.
1
4
2
5
7
13
3
6
Publicité
Table des Matières
