Installation & Testing - Hoover HF7 12 I Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

40000369.qxd
18/09/2003
Remove the machine from the
packaging - close to where it will finally
be positioned - and proceed as follows:
On the back of the machine
1) Remove the central screw A and side
screws B and pull out the transit bracket C
complete with the red spacer.
2) Tilt the machine forward and remove the
polystyrene spacers.
3
Cover the central hole using the cap
enclosed in the instructions bag.
4) Adjust the two feet at the front to level the
machine.
5) Tilt the machine forward and locate the
base panel by ➀ removing the paper
backing from the adhesive tape, ➁ locate
the base panel in the front of the machine
➂ offer the base panel up to the base of the
washing machine and locate the two clips.
11:42
Page 6
Installation & Testing
6

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Hf7 14 iHf7 16 i

Table des Matières