Selecting The Wash Progamme - Hoover HF7 12 I Mode D'emploi

40000369.qxd 18/09/2003
Selecting the wash programme
Refer to the programme guide or the programme descriptions on the front of the
machine to select the most suitable programme.
The programme is selected by turning the programme selector clockwise and
aligning the programme number with the indicator.
Check that the tap is turned on and that the discharge hose is positioned
correctly.
Press additional function buttons if you require.
Press the Départ/Pause button. The Porte Sécurisée indicator illuminates and the
programme will begin.
When the programme has finished:
– the Porte Sécurisée neon is lit and the display will read "DOOR LOCK
ACTIVATED PLEASE WAIT TO OPEN".
– the Porte Sécurisée neon goes out (Porte Securisée released) and the display
will read "PROGRAMME COMPLETE UNLOAD THE LAUNDRY".
– Switch off the machine by turning the control knob to the "Arrêt" position.
– Open the door and remove the laundry.
Disconnect the plug from the mains power supply and turn off the water supply
after every use.
11:43 Page 26
26