EXIT Toys InTerra 244 Mode D'emploi page 18

STEP 8
Look underneath the trampoline.
Locate the straps attached to the
underside of the frame pad. Position
each outer strap so that one strap is
on each side of the frame as shown.
Tie the outside straps sewn to the
Pad Joints to each side of the frame
as shown and attach the inner straps
to the near V-rings.
Repeat this step with the remaining
straps (not shown).
Using the included plastic tie, attach
the warning label (13) to the frame
near the point where jumpers will
climb onto and off the trampoline.
STEP 9
Close the slits of the skirts with
pressnuts and attach all the
Stakes(11) to each slot of the pad as
shown.
Congratulations! Your trampoline is
now fully assembled (put together).
Make sure that all parts are
securely attached. Familiarize
yourself and all users with the
trampoline, with the safety pre-
cautions, use and instructional
materials, and care and mainte-
nance instructions in this manual
before using the trampoline.
18
warning label
13
8
hole
Toprail Frame
Frame
Outer Straps
9
no safetynet
InTerra
Trampolines
Hole
Net of PAD (8)
Backside PAD (8)
Inner Straps
V-ring
11
with safetynet
Rope (14)