Conditions Of Use - Festo HMPL- Série Notice D'utilisation

HMPL-...
5

Conditions of use

Please note
Incorrect handling can lead to malfunctioning.
S These general conditions for the correct and safe use of the product must be
observed at all times.
S
Compare the maximum values specified with those of your application.
The maximum permitted values, e.g. for pressures, forces, torques, masses,
speeds and temperatures must not be exceeded.
S
Ensure that there is a supply of correctly
prepared compressed air.
S
Please observe the prevailing ambient
conditions.
S
Please comply with national and local
safety laws and regulations.
S
Remove all packaging.
The packaging is intended for recycling.
(Exception: oiled paper: this must be dis-
posed of ).
S
Maintain the selected medium for the
complete service life of the product.
Example: If non-lubricated compressed air
is used at the beginning, you should al-
ways use non-lubricated compressed air.
24
LF-... LR-...
Fig. 6
Fig. 7
Fig. 8
Festo HMPL-... 0005NH – English