Insert The Batteries - TFA 30.3066 Mode D'emploi

TFA_No. 30.3066_Anleitung_03_20
MARBELLA – Wireless pool thermometer
• Unauthorized repairs, alterations or changes to the product are pro-
hibited.
Caution!
Risk of injury:
• Keep these devices and the batteries out of reach of children.
• Batteries contain harmful acids and may be hazardous if swallowed.
If a battery is swallowed, this can lead to serious internal burns and
death within two hours. If you suspect a battery could have been
swallowed or otherwise caught in the body, seek medical help imme-
diately.
• Batteries must not be thrown into a fire, short-circuited, taken apart
or recharged. Risk of explosion!
• Low batteries should be changed as soon as possible to prevent
damage caused by leaking. Never use a combination of old and new
batteries together, nor batteries of different types.
• Wear chemical-resistant protective gloves and safety glasses when
handling leaking batteries.
Important information on product safety!
• Do not expose the devices to extreme temperatures, vibrations or
shocks.
• Attention: Close the pool sensor carefully, so that no water can pene-
trate the device.
• Protect the base station from moisture.
5. Elements
5.1 Base station (Receiver)
A: Display (Fig. 1):
Upper display
Indication of the indoor values or transmitter 1 or 2 (optional)
A 1: Time
A 2: DCF reception symbol
A 3: Maximum and minimum values
A 4: Temperature and humidity
A 5: Symbol for the indoor values, channel 1 or 2
22
10.03.2020 10:07 Uhr Seite 12
MARBELLA – Wireless pool thermometer
A 6: Reception symbol for the transmitter
A 7: Circle symbol for the automatically alternating channel
A 8: Battery symbol for transmitter 2 (optional)
A 9: Battery symbol for transmitter 1 (optional)
A 10: Battery symbol for the base station
Lower display
Indication for pool sensor
A 11: Symbol for auto-reset of the maximum-minimum values
A 12: Maximum/minimum water temperature
A 13: Battery symbol for pool sensor
A 14: Water temperature
B: Buttons (Fig. 2):
B 1: SET/RCC button
B 3: – MODE button
C: Housing (Fig. 2):
C 1: Wall mounting hole
C 3: Stand (fold out)
5.2 Pool sensor (Fig. 3+4):
D 1: Reception symbol
D 3: Battery symbol
D 5: Sensor
D 7: Battery container
6. Getting started

6.1 Insert the batteries

• Place the instruments on a table at a distance of about 1.5 meters
from each other. Avoid being close to possible sources of interfer-
ence such as electronic devices and radio equipment.
6.2 Installation of the base station
• Open the battery compartment and insert two new AA 1.5 V batte-
ries, polarity as illustrated.
• All segments will be displayed briefly.
B 2: + MAX/MIN button
B 4: CHANNEL/SEARCH button
C 2: Battery compartment
D 2: Water temperature
D 4: Eyelet for cord
D 6: Screw cover
23