Camoplast ATV T4S Directives D'installation page 8

5. Remove the mounting bolt (A) linking the lower
suspension arm to the wheel hub. See Figure 7.
Figure 7
6. Position tab with larger hole at the back of the
anchor bracket (9-10) over end of rear shock
absorber mounting tube as shown in Figure 8.
Figure 8
Installation Guidelines / Directives d'installation
5. Dévisser et retirer le boulon (A) qui relie le bras
inférieur de suspension au moyeu de roue. Voir
la Figure 7.
6. Placer l'ancrage anti-rotation (9-10) au tube du
bras de suspension servant à fixer l'amortisseur
arrière, tel que montré à la Figure 8.
Page 8
©2015 Camoplast Solideal inc.