Memory Functions - Bosch GLM 500 Professional Notice Originale

36 | English
Once the measurement is complete, the result for the required distance
X is displayed in the result row (e). The measured values for distances 1
12.208 m
and 2 and angle α can be found in the measured value rows (d).
-10°
10.154 m
Ensure that the reference level for the measurement (e.g. the rear edge
45.0°
of the measuring tool) remains in exactly the same place for all the indi-
8.765 m
vidual measurements in a single measuring process.
c) Indirect length measurement (see figure D)
Select the indirect length measurement mode
Ensure that the measuring tool is at the same height as the required measuring point.
Then tilt the measuring tool around the reference level and measure distance 1 as for a
length measurement.
Once the measurement is complete, the result for the required distance
X is displayed in the result row (e). The measured values for distance 1
20.000 m
and angle α can be found in the measured value row (d).
60°
60.0°
10.000 m
Grade measurement/digital spirit level
Select the inclination measurement/digital spirit level
The measuring tool automatically switches between two states.
The digital spirit level is used to check the horizontal or vertical align-
ment of an object (e.g. washing machine, refrigerator, etc.).
When the inclination exceeds 3°, the ball in the display lights up red.
1°2°3°
Inclination measurement is used to measure a slope or incline (e.g. of
stairs, railings, when fitting furniture, laying pipes, etc.).
The left-hand side of the measuring tool serves as the reference level for
inclination measurement. If the display flashes during measurement,
the measuring tool has been tipped too heavily to the side.

Memory functions

The value or end result of each completed measurement is automatically saved.
Memory value display
Maximum 20 values (measured values or end results) can be retrieved.
Press the memory button (6) [ ].
1 609 92A 4RG | (15.11.2018)
.
.
Bosch Power Tools