Memory Functions - Bosch GLM 40 Professional Notice Originale

28 | English
For simple Pythagoras measurements, repeatedly press button 4 [Func] until the in-
dicator for simple Pythagoras measurement
Make sure that there is a right angle between the sought distance (height) and the hor-
izontal distance (depth)! Then measure the depth and diagonal one after the other as
with a length measurement. The laser beam remains switched on between the two
measurements. The distance to be measured flashes in the indicator for simple Py-
thagoras measurement
The first measured value is shown at the top of the display.
After the second measurement has been completed, the height will
be automatically calculated and displayed. The end result is shown
at the bottom of the display, while the individual measured values
are shown above it.
Deleting Measured Values
Briefly pressing the On/Off button 5 [
measuring functions. Repeated brief pressing of the On/Off button 5 [
the measured values in reverse order.

Memory Functions

Memory value display
Maximum 10 values (measured values or end results) can be retrieved.
To display memory values, repeatedly press button 4 [Func] until symbol
shown on the display 1.
The number of the memory value is shown at the top of the display,
the corresponding memory value is shown at the bottom and the cor-
responding measuring function is shown on the left.
Press button 6 [+] to browse forwards through the saved values.
Press button 3 [–] to browse backwards through the saved values.
If there is no value available in the memory, "0.000" is shown at the bottom of the dis-
play and "0" at the top.
The oldest value is located in position 1 in the memory, while the newest value is in
position 10 (when 10 memory values are available). If a further value is saved, the
oldest value in the memory is always deleted.
2 609 141 206 | (14.8.14)
.
] will delete the last measured value in all
appears on the display 1.
] will delete
is
Bosch Power Tools