Disposal - VOLTCRAFT 51 83 70 Notice D'emploi

Problem
Red LED does not light up
The connected load unit is not running.
The red LED lights up dimly and the connected
load unit is not running, despite the correct
voltage mode being selected.
Important!
Please read and observe the safety notes! Repairs other than those described
above are only to be done by authorised specialists.
10.

DISPOSAL

In order to preserve, protect and improve the quality of environment, protect human
health and utilise natural resources prudently and rationally, the user should return
unserviceable product to relevant facilities in accordance with statutory regulations.
The crossed-out wheeled bin indicates the product needs to be disposed separately and
not as municipal waste.
16
Possible solution
No supply voltage?
• Check the fuse of the mains socket.
• Check whether the mains plug is correctly
connected.
Is the power supply unit overloaded?
• Disconnect all low voltage loads from the unit
and check the technical specifications.
Has the correct voltage been set?
Has the correct polarity been selected?
Does the red LED light up?
Is the power supply unit overloaded?
• Check the
specifications.
Check whether the voltage mode switch has
properly clicked into place. If not, position it
properly so that it clicks into place.
load unit's technical