Create Configuration File By Website; Load Configuration File Created On The Website Onto The Data Logger; Review Configuration Settings - VOLTCRAFT DL-260A Notice D'emploi

e) Create configuration file by website
• After performing configuration settings, select "CREATE CONFIGURATION" to download the configuration file to
your computer.
• A new window appears to change the configuration file name. Default name is "Setlog". If needed, change the
name of the file.
• Confirm the file name by clicking "CREATE CONFIGURATION". Your configuration file has been downloaded/
imported to your computer.
f) Load configuration file created on the website onto the data logger
• Remove protective cap from the data logger.
• Connect the data logger to your computer.
• Drag and drop the configuration file from the download folder of your computer to the data logger folder to execute
the configuration.
• The green LED control light (3) flashes twice, when the configuration file is successfully installed on the data logger.
• When the data logger is configured, disconnect the data logger from your computer.
g) Review configuration settings
• Start mode is based on the configuration setting "RECORD START CONDITION".
• Stop mode is based on the configuration "STOP STYLE".
• You can check which start mode is active, by loading the existing configuration file into the web interface, in the PDF
report or by entering the function menu of the data logger.
• You can check which stop mode is active, by loading the existing configuration file into the web interface or by
entering the function menu of the data logger.
• For further instructions regarding loading the existing configuration settings, please refer to "Other settings" on
page 43.
• For further instructions regarding entering the function menu, please refer to "a) Enter function menu" on page 49.
44