Installation Instructions - Outdoor Use - Danby Silhouette Professional DAR055D1BSSPRO Manuel Du Propriétaire

INSTALLATION INSTRUCTIONS - OUTDOOR USE
CASTER ROLLER INSTALLATION
FIG.1
A
B
C
FIG.3
a) Lay the unit on its back, taking proper care to not damage the floor or the
unit. Remove the 4 leveling legs(Fig.3 (A)) by turning clockwise. Save the
pieces for future use.
b) Assemble the casters with brake (Fig.3 (B)) on the cabinet front bottom
and the other 2 casters (Fig.3 (C)) at the cabinet rear bottom.
c) Assemble each caster to the bottom of the unit with (2) M5x10 screws with
a star or Phillips screwdriver (Fig.3).
d) The caster brake (Fig.3 (B)) at the front bottom of the cabinet comes with
a braking function. When brake handle is "ON" (Fig.2) unit wont roll, when
brake handle is "OFF" (released) it will roll. (Fig.2)
e) Place the unit upright taking care to not put all the unit's weight on the
rear castors.
FIG.2
Locked
(ON)
B
C
• Unplug the powercord and release
• Do not put any goods on top of the
Unlocked
(OFF)
• Push the cabinet from the rear
• Do not use the cabinet in bad
• Do not let children climb the cabinet
• Keep the caster brake in "ON"
• The cabinet must be put on a level
• The cabinet will reach its cooling
NOTE:
AFTER CASTER INSTALLATION, THE
UNIT MUST STAND UPRIGHT FOR 2
HOURS BEFORE BEING PLUGGED
IN. THIS WILL ALLOW THE INTER-
NAL FLUIDS TO SETTLE BACK INTO
PLACE. FAILURE TO DO THIS MAY
RESULT IN SYSTEM MALFUNCTION.
4
WARNING
the brake before moving the cabinet.
cabinet and avoid slanting the
cabinet when moving it.
making sure the door does not open.
weather to avoid short circuits.
Position the cabinet under a canopy.
or movethe cabinet to another
location.
position while in desired location.
ground.
effciency after one hour.