Horizon Fitness EX-59 Manuel Du Propriétaire page 13

ASSEMBLY STEP 8
CONSOLE
CONSOLE MAST
CONSOLE CABLES
UPPER HANDLEBAR
BOLTS (X)
PRE-INSTALLED
SET SCREWS
LOWER HANDLEBAR
NOTE: Be careful not
to pinch any wires while
attaching the console.
HARDWARE BAG 8 CONTENTS:
A Open HARDWARE BAG 8.
B Attach the CONSOLE CABLES to the CONSOLE.
C Carefully tuck the CONSOLE CABLES into the
CONSOLE MAST before attaching the CONSOLE.
Attach CONSOLE to CONSOLE MAST using
4 BOLTS (X).
D Slide the RIGHT UPPER HANDLEBAR onto
the RIGHT LOWER HANDLEBAR making sure
handlebars are joined together completely. Secure
the RIGHT UPPER HANDLEBAR to the RIGHT
LOWER HANDLEBAR using PRE-ATTACHED
SET SCREWS.
Make sure upper handlebars are as far down as possible.
Handlebars can be damaged If not secured correctly.
E Repeat step D on the opposite side of the elliptical.
YOU ARE FINISHED!
BOLT (X)
10 mm
Qty: 4
13