Mounting Guides For Expansion Process Jrg Sanipex Mt D50+D63 - GF JRG Sanipex MT Notice D'utilisation Et D'entretien

5.1.4 Mounting guides for expansion process JRG Sanipex MT d50+d63

Remark:
Ending the expansion process
The expansion unit can only be opened once the ready lamp of the hydraulic unit is on.
Warning:
Correct flange
The pipe must not be touched or de-burred otherwise the flange will be too long.
Exception:
If the pipe cannot be shortened with a cutter for plastic pipes, then the pipe can be
lightly freed from shavings after the expansion process.
Remark:
Visual check of connection
Locking ring visible Locking ring not visible
Connection not fully on Connection fully fitted
78