Trim Installation - Toto TS970C1 Manuel D'installation

■ remove the protective cover from
the valve�
■ Place the faceplate against the
finish wall and secure with escutcheons
■ set the voluMe control valve
to the off position by rotating valve
so that the flat point is at the 12 O'clock
position�
for TsTd model: you will
hear a click sound
for TsTa model: you will
come to a stop�
■ Control knobs must be
dissassembled prior to installation�
remove the front cover, the small
set screw, the lever, and the large
set screw (beneath lever)�
■ Install the voluMe control
knob onto the volume control valve
with the hole at 12 o'clock position�
secure knob with large set screw�
screw in lever handle and secure
with small set screw� replace cover�
■ Install the TeMPeraTure control
knob onto the temperature control valve
with the lock button at 12 o'clock
position� secure knob with large set
screw� screw in lever handle and secure
with small set screw� replace cover�

TriM inSTallaTion


Valve
Faceplate
Valve
Flat
Lever Handle
Volume Control knob
Temperature
Control knob
Valve
Large Set Screw
Small Set Screw
Cap
Locking Button