Guarantee And Service; Frequently Asked Questions - Philips SCD505 Mode D'emploi

6 Guarantee and
service
If you need service or information or if you
have a problem, please visit the Philips AVENT
website at www.philips.com/AVENT welcome
or contact the Philips Consumer Care Centre
in your country. You can find the phone number
of the Philips Consumer Care Centre in the
worldwide guarantee leaflet. If there is no
Philips Consumer Care Centre in your country,
please visit the local Philips dealer.
7 Frequently
asked questions
Why doesn't the link indicator on the parent
unit light up when I press
unit?
• Connect the parent unit to a power
supply.
• Reset the parent unit to the default
settings.
Why doesn't the on indicator on the baby unit
light up when I press
• Replace the batteries in the baby unit or
connect the baby unit to a power supply.
• Reset the baby unit to the default settings.
Why doesn't the indicator on the parent
unit light up when I start recharging the
parent unit?
• It takes a few minutes before the battery
indicator lights up especially when the
parent unit is charged for the first time or
not in use for a long period of time.
Why does the parent unit beep?
• If the parent unit beeps while the
indicator flashes red, move the parent unit
closer to the baby unit to re-establish link
between the parent unit and the baby unit.
• If the parent unit beeps and the battery
indicator flashes red, recharge the parent
unit.
• If the baby unit is turned off, turn on the
baby unit.
Why does the parent unit generate a
high-pitched noise?
• Position the parent unit and the baby unit
with a minimum distance of 1.5 metres/
5 feet. It takes a few seconds for the
acoustic suppression to activate.
• Decrease the volume of the parent unit.
on the parent
on the baby unit?
link
EN 11