Control Panel; Power Switch - HQ Power PA100U Notice D'emploi

5. Overview
Refer to illustration 1 on page 2 of this manual.
1 MIC 1 INPUT
¼" jack connection for your main microphone.
2 MIC 2 INPUT
¼" jack connection for a secondary microphone.
3 AUX INPUT
¼" jack connection for your CD or MP3 player.
4 MIC 1 LEVEL CONTROL
Volume control button for your main microphone.
5 MIC 2 LEVEL CONTROL
Volume control button for the secondary microphone.
6 AUX LEVEL CONTROL
Volume control button for the AUX input.
7 MASTER TREBLE CONTROL
Treble tone control button for the master output.
8 MASTER BASS CONTROL
Bass tone control button for the master output.
9 ECHO LEVEL CONTROL
Echo depth control button.
10 ECHO REPEAT CONTROL
Echo repeat control button.
11 ECHO SPEED CONTROL
Echo delay length control button.
12 SPEAKER 1 LEVEL CONTROL
Volume control button for the built-in speaker.
13 SPEAKER 2 LEVEL CONTROL
Volume control button for the auxiliary speaker.
14

POWER SWITCH

On/off switch. Turn the amplifier on last and off first.
15 AC LED
Lights when the amplifier is connected to the mains.
16 DC LED
Lights when the amplifier is powered by the internal battery.
17 BAT.FUL LED
Lights green when the internal battery is fully charged or red when the internal battery needs
recharging.
18 USB CONNECTION
USB connection for your USB stick.
19 BUTTON
Play/pause button for your MP3 files on your USB stick.
20 /VOL.- BUTTON
Press once to select the previous track on your USB stick; press and hold to turn down the volume
level.
21 /VOL.- BUTTON
Press once to select the next track on your USB stick; press and hold to turn up the volume level.
12.09.2011
PA100U

CONTROL PANEL

4
Rev. 01
©Velleman nv