Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
II - Installation of Harmonys microphone
Select the location where the Harmonys microphone will be installed by making sure of the
presence of the network cable PoE.
1/ The Harmonys micorphone is designed to be used on any flat surface: table, counter top, or
desk top. Mechanical intervention is not necessary for the installation.
2/ Connect the Ethernet network cable to the RJ45 connector.
Ethernet cable category: 5 minimum or 6.
The broadcast mode will have to be selected in the embedded web server (see page 23),
particularly the Multicast address which must be the same as that of the server (by default
239.192.55.1). Record the MAC address (identification label on the back of the product) of the
product, it will be useful during its detection by the Sigma software in order to rename it.
III - Identification of the Harmonys microphone keys
8 zones Microphone
Microphone
Speaker
REC key
PLAY key
Possible combination with key
-
: Recording of a vocal message. Remain rested during all the duration by the recording in
following the instructions on the screen
-
: Listening of the prerecorded message on the integrated loud speaker.
-
: Live broadcast of the message sent to the microphone.
-
+
: Broadcasting of the prerecorded message.
18
18
zones / groups selection keys
,
,
:
LCD display
LIVE key
Dialling keys
Navigation and correction keys
Multizone Microphone
Publicité
Table des Matières
