5.3 Parameters page
This page allows to configure the functional features of the microphone.
The information displayed is described below:
- Personalised greeting: set a one- or two-line message that will be displayed on the microphone's
- Multicast address: for sending messages from the microphone
- Priority: Choose the priority to apply in case a sounder has several audio streams incoming from
different microphones.
- High: the incoming stream with high priority will continue to be played regardless of the other
incoming streams.
- Average: the incoming stream with average priority will continue to be played if another stream
with low priority is incoming but will be cut and replaced by an incoming high-priority
stream.
- Low: The incoming stream with low priority will be played if another low priority stream is
incoming (chronological order of priority: the first stream to come in will be retained).
- Speaker volume: adjusting the speaker volume of the microphone (level 1 : low, level 8 : high).
- Microphone gain: 3 levels of gain (low, normal, high) for adjusting the gain of the microphone.
- Broadcast button: 2 broadcast options are possible:
- Push to talk: when speaking, continue to press the button to broadcast the message.
- Start/stop: activation upon first press and deactivation when pressed a second time.
- User langue: possibility to choose the display of the LCD language. 4 languages are available:
English, French, Spanish, deutsch.
The Save button saves your configuration and reboots the microphone.
26
26
LCD screen.
Allows you to increase or decrease the power or amplitude of the signal.