Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
I - Initial Verification
Thank you for choosing a BODET Harmonys microphone. This product has been carefully
designed for your satisfaction based on ISO9001 quality requirements.
We recommend that you read this manual thoroughly before attempting to manipulate the
product.
Keep this booklet during all the life of your product, so that you can refer to it each time it is
necessary.
Bodet cannot be held responsible for damages caused to the product due to use that
does not conform to the instructions described in this manual.
Any unauthorised modification of the product will invalidate the warranty.
1.1 Unpacking the Harmonys
Unpack with caution and check the contents of the packaging.
Reference 907755 must contain:
■ Harmonys microphone - 8 zones,
■ This booklet,
Reference 907757 must contain:
■ Harmonys multizone microphone,
■ This booklet,
1.2 Cleaning
Use an antistatic product.
Never use alcohol, acetone or other solvents which may damage product casing.
1.3 Pre-requisit
For the commissioning of the Harmonys microphone, you must install the SIGMA software
(supplied on a USB key with your master clock) on your PC. To download the latest version of
the software, contact our export department who will send you the download links by email.
Contact Export department : 02.41.71.72.33 / export@bodet-timesport.com
Important: to check compatibility of your equipment and the software version, please have the
version of your master clock.
Note: the Ethernet network connection to which the Bodet Harmonys microphone is connected
must be PoE, the power being supplied by a PoE switch or a PoE injector. Make sure that the
power capacity of your switch or injector is sufficient to power your product.
Bodet recommends the following brands:
■ PoE injectors: Zyxel, Tp link, D-Link, HP, Cisco, Axis, ITE Power Supply, PhiHong, Abus,
Globtek.
■ PoE switches: D-Link, HP, Planet, Zyxel, Cisco, NetGear, PhiHong.
17
17
Publicité
Table des Matières
