Example Using 3 Or More Microphones On A Site - Bodet Harmonys 907755 Notice D'utilisation Et D'installation

4.8 Example using 3 or more microphones on a site

Excluding unicast call. In this case, there are 3 microphones: M1, M2 and M3.
M1 has the highest priority, M2 and M3 have the same priority (refer to page 26).
Scenario 1: an announcement from M1 is in progress. An announcement starts on M2.
On M2 :
- audio is no longer broadcast over the network,
- the speaker emits a double beep and for the duration of pressing, (and for at least 3 seconds)
the LCD screen displays:
Scenario 2 : an announcement from M1 is in progress. On M2 and M3, at the moment of
pressing in order to broadcast:
- the audio is not broadcast over the network
- the speaker emits a double beep and the LCD screen displays:
Scenario 3 : an announcement from M2 and M3 are launched simultaneously.
On M2 and M3 :
- audio is no longer broadcast over the network,
- the speaker emits a double beep and for the duration of pressing, (and for at least 3 seconds)
the LCD screen displays:
Broadcast
interrupted
Broadcast
unavailable
Broadcast
interrupted
23 23