Allen-Bradley 931S-F1C2D-DC Notice D'utilisation page 3

1. General instructions
WARNING WARNING WARNING WARNING
• Disconnect power prior to installation
• Installation only by Qualified personnel
• Follow all applicable local and national electrical codes
For applications with high isolation voltages, take measures to prevent
accidental contact and make sure that there is sufficient distance or
insulation between adjacent devices!
Appropriate safety measures against electrostatic discharge
(ESD) should be taken during assembly and adjustment work on
the 931S-F1C2D-DC.
2. Application
The 3 Way Frequency Converters 931S-F1C2D-DC are used for galvanic
isolation and conversion of frequency signals. Input and output signals
can be calibrated/switched via DIP switches. It is not necessary to adjust
the pre-settable measurement ranges. The output signal is linear to the
frequency.
1