Axis 206W Guide D'installation Rapide page 7

AXIS 206W Quick Installation Guide
The AXIS Internet Dynamic DNS Service
The AXIS Internet Dynamic DNS Service is a free service that allows you to quickly and simply
assign your camera a static name (DNS name). More information about the AXIS Internet
Dynamic DNS Service is available at www.axiscam.net
Please note that this procedure will send the AXIS 206W's IP address, firmware version,
product type and serial number to the AXIS Internet Dynamic DNS Service. No personal
information is transferred.
Follow these instructions:
1. Check that the Status indicator on the front of the camera shows a steady green.
2. Press the Control button on the rear of the camera once. The Status indicator will blink
green while it connects to the AXIS Internet Dynamic DNS Service.
3. Wait for the Status indicator to go back to showing a steady green.
4. To complete the installation, now visit www.axiscam.net from an Internet connected PC.
This must be done within 60 minutes of pressing the Control button.
5. Follow the on-screen instructions provided by the AXIS Internet Dynamic DNS Service.
You will need your product's serial number (S/N) to complete the installation. This is found
on the label on the rear panel. See page 3.
Accessing the AXIS 206W from the Internet
Once installed, your AXIS 206W is accessible on your wireless network. To access the camera
from the Internet you must configure your broadband router to allow incoming data traffic.
For security reasons this is usually done on a specific port. Please refer to the documentation
for your broadband router for further instructions.
For more information, please visit the AXIS Internet Dynamic DNS Service at
www.axiscam.net or, for Technical notes on this and other topics, visit the Axis Support Web
at www.axis.com/techsup
Page 7