Makita UB1103 Manuel D'instruction page 5

Class II Construction
revolutions or reciprocation
per minute
FUNCTIONAL
DESCRIPTION
CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function
on the tool.
Switch action
CAUTION:
• Before plugging in the tool, always check to see
that the switch trigger actuates properly and
returns to the "OFF" position when released.
2
3
► 1. Switch trigger 2. Speed control screw 3. Higher
4. Lower 5. Lock button
To start the tool, simply pull the switch trigger. Tool
speed is increased by increasing pressure on the switch
trigger. Release the switch trigger to stop. Switch can
be locked in "ON" position for ease of operator comfort
during extended use. Apply caution when locking tool in
"ON" position and maintain firm grasp on tool.
For continuous operation, pull the switch trigger, push in
the lock button and then release the switch trigger.
To stop the tool from the locked position, pull the switch
trigger fully, then release it.
A speed control screw is provided so that maximum tool
speed can be limited (variable). Turn the speed control
screw clockwise for higher speed, and counterclockwise
for lower speed.
1
5
4
OPERATION
CAUTION:
• Always hold the tool only by the handle when per-
forming an operation. Do not touch the metal part.
• Do not use the tool for blowing air into objects,
like rubber rafting, balls or other inflatable prod-
ucts. Increased motor revolution may cause
dangerous fan breakage.
Blowing
1
► 1. Nozzle 2. Blower outlet 3. Pin
For dust blowing, attach nozzle to blower outlet. Turn it
clockwise until it clicks.
Dust suction (optional accessory)
1
► 1. Dust bag 2. Blower outlet 3. Nozzle 4. Suction inlet
5 ENGLISH
3
2
2
4
3