Before First Use - STARFRIT 024715 Instructions Pour L'usage Et L'entretien

BEFORE FIRST USE

Read the instructions before use
NOTE: During first use of the appliance, smoke and/or a slight odour may occur from the
appliance. This is normal and will quickly disappear. It will not recur after appliance has
been used a few more times.
A. Remove the unit and lever from the package.
B. Wash the lever with a damp cloth and dry thoughly, securely place by pressing
all around.
C. Clean the can opener housing with a soft, damp cloth and dry completely.
TO ASSEMBLE
A. Attach lever to the can opener by inserting the rounded end of the lever in the
housing and push it to affix it. (see Fig.1)
B. Press the lever downwards so that the blade pierces the cover and cutting begins.
The lid of the can will be held by the magnetic lid holder. (see Fig. 2)
FIG.1
TO USE
Read the instructions before use
1. Connect to the power source.
2. Position the can so that its rim is under the can pin guide and press the lever
downwards so that the blade pierces the cover and cutting begins. The lid of the
can will be held by the magnetic lid holder. (see Fig. 3)
3. The geared wheel will allow the can to rotate and the blade will cut the can lid
open. Because of the hands-free feature, it is not necessary to hold lever down or
support the can during cutting.
NOTE: The dimensions for a can should between 5 cm to 10 cm (2 inches to 4
inches) in diameter. The height should not exceed 14 cm or 5 inches. If total weight
of the can is over 510 g or 1.1 lbs, it is necessary to press and hold the can opener to
avoid overturning.
4
FIG.2 FIG.3