Metabo HPT CB 18DBL Instructions De Sécurité Et Mode D'emploi page 17

● Use caution when changing or inspecting the
band saw blade as it may sometimes spring out.
CAUTION
● Wear gloves when changing the band saw blade.
● The band saw blade is hot immediately after
operation. Remove it only after it has cooled.
How to remove (Fig. 12)
Loosen the tension lever in the direction indicated in the
fi gure.
Open the cover by pressing Blade pulley cover tabs (A)
and (B).
Like the fi gure on the right, insert a screwdriver between
the side of the band saw blade and the frame.
As you press the screwdriver against the side of the band
saw blade, lean the screwdriver towards the revolving
direction of the band saw blade. By slowly revolving the
band saw blade, the blade will come loose from Blade
pulley (A).
Remove the band saw blade.
Tension lever
1
2
Blade pulley
cover (A)
Blade pulley (A)
2
Band saw blade
Band saw blade
Fig. 12
English
Blade pulley
cover (B)
Tab
1
2
1
17