Bticino 391.115 Guide Rapide page 25

I .1 , , _:1 -1 -'1 7, _1"2 - :
Email Enable
551
Enable
SMTP Port 00025
41—
SMTP Server
Sender
Sender Password
Receiver
tervaf 3 min
Test Email
Do Not show this window next tirne_ X Cancel
C
Premixis
11/•
Next
2.1.4 Configuring email notification
The email notification function sends an email on detection of movement, alarm, etc.
Activate email
notification
Time interval
to be applied
NO_IP
Enable
DDNS
Server
Domain
User
Password
• • •
DD amfiguraton
Test DDNS
Do
Not show This window next time. X Cancel
F Previous Savek
bbconce
Step 1: Select "Static" in the "Type" line.
Step 2: Enter the IP address of the recorder in the "IP Address" field.
Step 3: Enter the subnet mask in the "Subnet Mask" field (default: leave 255.255.255.0).
Step 4: Enter the address of the box in the "Gateway" field.
Step 5: Enter the address of the box in the "DNS1" & "DNS 2" fields.
- Activate SSL security
- SMTP port
- SMTP server
— Sender's email
- Sender's password
- Receiver's email
Select "Enable" in the "Email" dropdown menu.
Select "Enable" in the "SSL" dropdown menu to
attivate a secure protocol.
Enter the SMTP port in the "SMTP Port" field.
Enter the SMTP server in the "SMTP Server" field.
Enter the sender's email address in the "Sender" field.
Enter
the sender's SMTP account password in the "Sender Password" field.
Enter the addressee's email address in the "Receiver" field.
Select the minimum time between sending two emails in the "Interval" dropdown menu.
Note: The SMTP settings are given by the email service provider.
2.1.5 DDNS configuration
Activate DDNS
Select the DNS server
Name of the recorder
Name of the DNS user
DNS password
Select the DNS server corresponding to the service used (for example No-IP) in the "Server" dropdown menu.
25