Maintenance And Storage; Replacement Parts And Wearing Parts; Technical Data - Beurer MP 55 Mode D'emploi

6. Maintenance and storage

WARNING
• Unplug the device each time before cleaning.
• Clean the device using only the methods specified. Under no circumstances may
liquid enter the device or the accessory.
• Clean the callus attachment with the cleaning brush. We recommend that you
moisten this beforehand with alcohol to guarantee a hygienic clean.
• Make sure that the relevant callus attachment is completely dry before you put it
back on the device.
• Do not use the device again until it is completely dry.
• Do not clean the device in the dishwasher.
• Do not use any abrasive cleaning products or hard brushes.
Clean the unplugged device once it has cooled down using a soft, slightly damp cloth
and a mild cleaning agent. Then wipe dry with a soft, lint-free cloth.

7. Replacement parts and wearing parts

Replacement parts and wearing parts are available from the corresponding service address
(according to the service address list). Please state the corresponding order number.
Abrasive roller (coarse, fine) replace-
ment set
Rasp replacement set (contains 2 rasps)

8. Technical Data

Disposal
Dimensions
Weight
Battery:
Capacity
nominal voltage
type designation
Item number and/or order number
573.07
573.08
Input: 100-240 V ~ 50/60 Hz
Output: 5.0 V 1000 mA
16.8 x 7.3 x 5.0 cm
approx. 150 g
2000 mAh
3.7 V
Li-Ion
18