Turning Power On/Off; Turning On The Main Power - Sharp PN-HW861 Manuel D'installation

Caution
• Turn on the monitor first before turning on the computer or
playback device.
• When switching the main power switch or the POWER
button off and back on, always wait for at least 5 seconds.
A short interval may result in a malfunction.

Turning on the main power

[PN-HW861/PN-HW751/PN-HW651]
Main power switch
[PN-HW551/PN-HW501/PN-HW431]
Main power switch
Caution
• The main power must be turned on/off with the main power
switch. Do not connect/disconnect the power cord or turn
the breaker on/off while the main power switch is on.
• For a complete electrical disconnection, pull out the main plug.

Turning Power On/Off

Turning power on/off
Press the POWER button to turn the power ON/OFF.
You can also turn the power ON/OFF by pressing the
MONITOR ON button/MONITOR OFF button on the remote
control unit.
[PN-HW751/PN-HW651/
PN-HW551/PN-HW501]
Power LED
Green lit
Orange lit
Green flashing
• Setting the SCHEDULE flashes the power LED alternately
in red and orange in standby mode.
nHow to pull out the power LED/remote
control sensor
Pull out
Power LED / Remote control sensor
[PN-HW861]
Power LED
[PN-HW431]
POWER button Power LED POWER button
Status Status of the monitor
Power on
Power off (Standby mode)
Input signal waiting mode
Store
Lever
POWER button
7
E