TEMPUR-PEDIC EASE Manuel Du Propriétaire page 13

remote control
Remote Pairing
The original remote that comes in the box is already paired to
the adjustable base. No further action is required. In the event
that the remote is not paired with the base, follow the steps
below.
STEP 1
Remove rear cover of the remote control by sliding it down
to expose the PAIR button. Unplug the Power Cord from your
power outlet. Wait 1 minute, then plug it back in to your power
outlet. Perform Step 2 within 10 seconds, while the control
box light is flashing.
Power Supply
STEP 2
Press and hold the PAIR button on the
back of the remote. The PAIR button
will illuminate and start to flash. When
the PAIR button stops flashing, the LED
light on the control box will stop flashing.
Release the PAIR button.
STEP 3
Test all remote functions. If the remote buttons do not impact
the adjustable base movements, please repeat the process again
or call customer service: U.S. 1-800-499-1965 | Canada 1-800-
268-4414
Power Cord
Child Lock Feature
Activate Child Lock
Press and hold the HEAD UP and FOOT UP
buttons together for 3 seconds until the
remote backlight flashes twice.
The remote is now in Child Lock. Pressing
any buttons while in Child Lock will yield no
movement to your adjustable base.
Deactivate Child Lock
Press and hold the HEAD DOWN and
FOOT DOWN buttons together for three
(3) seconds, then hold HEAD UP and FOOT
UP for three (3) seconds until the remote
backlight flashes twice.
The remote is no longer in Child Lock.
The remote and adjustable base will work
normally.
9