VelLight LAL1M5C Mode D'emploi page 5

4. Features
This LED lamp with E27 socket can be used as a normal warm white
LED lamp. It allows creating multicolour effects via the built-in RGB
LEDs.
 colour selection via IR remote control (incl.)
 multi-colour:
o static colour
o fade, flash, strobe and smooth effects
5. Overview
Refer to the illustrations on page 2 of this manual.
1 dimming
2 red, green and blue setting
3 single colour selection
4 battery compartment
5 on-off switch
6 warm white
7 fast RGBW colour change
8 normal RGBW colour change
9 slow RGBW colour change
10 very slow RGBW colour change
6. Remote Control
Battery
Refer to illustration on page 2 of this manual.
The remote control uses 1 battery type 3 V lithium CR2025
(included). Remove the tag from the battery compartment before
use.
1. To (re)place a battery, press on the side of the battery cover
and pull to slide open.
2. Insert the battery with the correct polarity and close the battery
compartment by pushing back into the housing of the remote
control until it snaps into place.
V. 01 – 01/12/2015
LAL1M5C
5 ©Velleman nv