FTE Maximal DVB 300 T HD Manuel D'utilisation page 12

1.4.2. Examples of installations
Note: In order to guarantee the right running of the different equipments of
the installation, we recommend you to provide the inputs and outputs which
are not used with a 75 load (FCF).
2. Programming and configuring
1
2
3
4
User's manual · DVB 300 T HD
Example of an installation in a dwelling with 3 floors where there are
6 analog terrestrial channels distributed freely to all the users of the
building.
The headend has 6 DVB 300 T HD, a SPS 310 power supply and an
AMP 310 amplifier that amplifies and equalizes the signal so all
users will receive an ideal signal in their outlets
1. Programming of the module general parameters:
Language, TV system, output format, output channel and
subtitle visualization.
2. Programming of the parameters of the multiplex to be
tuned: Terrestrial frequency, FFT mode, guard interval and
5
type of tuned channels.
3. Access to the different functions provided by the module:
searching channels according to the configured parameters
change among TV and radio tuned channels, access to the
channels list, removing channels, updating the module and
6
reset.
4. List of tuned channels: it allows the selection of the
channel to be transmitted; it can be TV or radio.
5. Giving information about the visualized module: Date and
7
firmware version.
6. Giving information about the selected position in the
menu. How to program or which options this section has.
7. Providing the data of the PID channels that are being
transmitted at the moment.
- 3 - DVB 300 T HD Version_en_1.0 FTE maximal