IV. INSTRUCTIONS TO USE
Precautions:
1. Place the product in a vertical position on a flat, stable surface, stable and heat-
resistant. Make sure there are no flammable or heat-sensitive product within 1 meter
(40 inches).
2. Once mounted feet, this device should be used only in vertical position.
3. This device must operate with a power source AC. Before connecting the appliance,
make sure that the technical characteristics of electrical home installation are in line with
the information given on the nameplate of the unit.
4. Always unplug from the electrical outlet when left unattended or if it is not used.
Getting Started:
B- Luminous indicator
C- Thermostat setting
D- Setting the power
1. Plug record electrical alimentions to a wall outlet, and then adjust the power switch (D)
to the desired power:
"●" minimum power
-
"●●" average power
-
"●●●" maximum power
-
2. Turn the thermostat button (C) in the direction of clockwise until it stops. When the
ambient temperature reaches a comfortable level, slowly turn the thermostat in the
opposite direction of clockwise until the indicator (B) turns off.
To adjust the room temperature, turn the thermostat in the direction of clockwise to
increase the temperature or in the opposite direction for lowering. Thus, the heating
device will attempt to maintain the ambient temperature at the desired level.
32